We want to reduce the moisture content! We want to migrate from other filtration machines (Nutsche) to centrifuges! Bottom-discharge DMN β

“We want to introduce a GMP-compatible, fully automatic centrifuge”DMNβ

“We want to prevent contamination from oil leaks” DMNβ

“We want to make a “fascinating factory” for visitors on a tour of our factory” KMβ

“We want to filter the residue in liquid fertilizer” BDMNβ

“We want to collect a small amount of powder from a dilute liquid” BDMNβ

“Filter replacement is unnecessary! -Protect the machine operator with the electronic beam screen-” MARK3β

“We want to introduce automation on a low budget” DIBUCβ

“Replacing the filter cloth takes time and labor” MARK3β

“We want to be able to take out fiber products from the machine cleanly”KMβ

“Emphasis on ease of cleaning and checking cleaning” DMNβ

“We want to collect high-value cutting oil, re-use it, and reduce costs” M-Series

“We want to collect and remove crystals easily even with a top-discharge centrifuge” KMβ

“We want to reduce costs by reusing usable parts and updating our aging machine”MARK3β

“We want to do something about the high costs of tests with expensive samples” LAC

“We want to reduce the scraping time for hard crystals” MARK3β

“We want to reduce the drying time for metal parts” KMβ

“We want to understand the filtration status and how the product is being filtered at any time” LAC

“we want to operate our plant for 24 hours continuously without halting manufacturing” MARK3β

“We want to reduce filtration time and raise production efficiency” MARK3β

“We want to re-dissolve the crystals during filtration” BDMNβ

“We want ease of maintenance and daily operation” MARK3β

“We want to make it easy to clean the basket bottom surface” DMNβ

“Emphasis on ease of cleaning and checking cleaning” DMNβ

“We want a centrifuge but want to keep costs down as much as possible as we have a limited budget” KMβ

“We want to remove oil from snacks” DMNβ

“We want to filter with a machine to leave a certain amount of cloudiness, reducing manual tasks and increasing efficiency” KMβ

“We want to prevent mixing of foreign matter (contamination) by installing a centrifuge inside our clean room” eMV

“We want to prevent mixing of foreign matter (contamination) by installing a centrifuge inside our clean room” JMP-S

“We want a mechanism that does not allow dust to escape inside the clean room” KMβ