We want to prevent mixing of foreign matter (contamination) by installing a centrifuge inside our clean room.
We received a request from a pharmaceuticals manufacturer who were planning to construct a new factory, “By installing a centrifuge in the clean room , we want to prevent mixing of foreign matter (contamination).” So, they introduced the horizontal centrifuge, JMP-S.
We were told that, as a result of using our centrifuge, checking the cleaning of the machine interior was easy, leading to reduced work time and increased work efficiency.
The JMP-S supplied
As we were able to divide this horizontal centrifuge with the clean room wall into a pharmaceutical manufacturing processing unit and a motor drive unit, and also as the basket came right in front of the operator, it is possible to clean the interior surface and the back of the basket, and so on, without any blind spots and to check the cleaning.
In addition, it is possible to perform the task of exchanging the filter, etc., easily compared with a vertical type, leading to reduced work time and increased work efficiency.
Key Points
Cleaning and checking cleaning are easy
If the casing is opened, since the basket is right in front of you, leaning and checking the cleaning are easy.
In addition, due to the structure with no liquid pooling as there is no dead space in the processing area, internal inspection is easy.
Filter replacement task is easy
If the casing is opened, since the basket is right in front of you, the filter can also be easily replaced.
Work environment is always clean
As all operation is carried out in containment , the operator does not come into contact with solvents or gases, so the work environment can be kept clean.
In addition, by isolating the drive unit and processing unit with a wall, as the drive unit can be placed outside the clean room, no foreign matter appears inside the clean room.
Installation area within the clean room is small
Since the drive unit and manufacturing unit are isolated with a wall, only the processing unit is installed inside the clean room, and the drive unit is placed outside the clean room, so the installation area within the clean room can be kept small.
Fully automated cleaning
Automatic cleaning of all parts in contact with the product is possible using a CIP cleaning nozzle.
Even fine particle residue can be cleaned with immersion cleaning.
Company supplied
The pharmaceuticals manufacturer, K Corporation
Centrifuge supplied
*Customers interested in a horizontal centrifuge equipped with functions suitable for installation in a clean room who are focused on cost, please also check the eMV which prevents mixing of foreign matter by installation inside a clean room and also keeps cost down.
For any questions or inquiries regarding centrifuges, feel free to contact Matsumoto Machine Sales, the sales arm of the pioneering centrifuge manufacturer.
